@article {397, title = {Dehydrated Biomimetic Membranes with Skinlike Structure and Function}, journal = {ACS Applied Materials \& Interfaces}, volume = {16}, year = {2024}, pages = {20865-20877}, abstract = {

Novel vapor-permeable materials are sought after for applications in protective wear, energy generation, and water treatment. Current impermeable protective materials effectively block harmful agents but trap heat due to poor water vapor transfer. Here we present a new class of materials, vapor permeable dehydrated nanoporous biomimetic membranes (DBMs), based on channel proteins. This application for biomimetic membranes is unexpected as channel proteins and biomimetic membranes were assumed to be unstable under dry conditions. DBMs mimic human skin{\textquoteright}s structure to offer both high vapor transport and small molecule exclusion under dry conditions. DBMs feature highly organized pores resembling sweat pores in human skin, but at super high densities (\>1012\ pores/cm2). These DBMs achieved exceptional water vapor transport rates, surpassing commercial breathable fabrics by up to 6.2 times, despite containing \>2 orders of magnitude smaller pores (1 nm vs \>700 nm). These DBMs effectively excluded model biological agents and harmful chemicals both in liquid and vapor phases, again in contrast with the commercial breathable fabrics. Remarkably, while hydrated biomimetic membranes were highly permeable to liquid water, they exhibited higher water resistances after dehydration at values \>38 times that of commercial breathable fabrics. Molecular dynamics simulations support our hypothesis that dehydration induced protein hydrophobicity increases which enhanced DBM performance. DBMs hold promise for various applications, including membrane distillation, dehumidification, and protective barriers for atmospheric water harvesting materials.

}, doi = {10.1021/acsami.3c19572}, url = {https://doi.org/10.1021/acsami.3c19572}, author = {Oh, Hyeonji and Tu, Yu-Ming and Samineni, Laximicharan and De Respino, Sophie and Mehrafrooz, Behzad and Joshi, Himanshu and Massenburg, Lynnicia and Lopez-Marques, Horacio and Elessawy, Nada and Song, Woochul and Behera, Harekrushna and Dhiman, Raman and Boorla, Veda Sheersh and Kher, Kartik and Lin, Yi-Chih and Maranas, Costas and Aksimentiev, Aleksei and D. Freeman, Benny and Kumar, Manish} } @article {371, title = {Resolving Isomeric Posttranslational Modifications Using a Biological Nanopore as a Sensor of Molecular Shape}, journal = {Journal of the American Chemical Society}, volume = {144}, year = {2022}, month = {08/2022}, pages = {16060--16068}, abstract = {

The chemical nature and precise position of posttranslational modifications (PTMs) in proteins or peptides are crucial for various severe diseases, such as cancer. State-of-the-art PTM diagnosis is based on elaborate and costly mass-spectrometry or immunoassay-based approaches, which are limited in selectivity and specificity. Here, we demonstrate the use of a protein nanopore to differentiate peptides-derived from human histone H4 protein-of identical mass according to the positions of acetylated and methylated lysine residues. Unlike sequencing by stepwise threading, our method detects PTMs and their positions by sensing the shape of a fully entrapped peptide, thus eliminating the need for controlled translocation. Molecular dynamics simulations show that the sensitivity to molecular shape derives from a highly nonuniform electric field along the pore. This molecular shape-sensing principle offers a path to versatile, label-free, and high-throughput characterizations of protein isoforms.

}, doi = {10.1021/jacs.2c06211}, url = {https://pubs.acs.org/doi/full/10.1021/jacs.2c06211}, author = {Tobias Ennslen and Kumar Sarthak and Aleksei Aksimentiev and Jan C. Behrends} } @article {356, title = {The emerging landscape of single-molecule protein sequencing technologies}, journal = {Nature Methods}, volume = {18}, year = {2021}, month = {06/2021}, chapter = {604-617}, abstract = {

Single-cell profiling methods have had a profound impact on the understanding of cellular heterogeneity. While genomes and transcriptomes can be explored at the single-cell level, single-cell profiling of proteomes is not yet established. Here we describe new single-molecule protein sequencing and identification technologies alongside innovations in mass spectrometry that will eventually enable broad sequence coverage in single-cell profiling. These technologies will in turn facilitate biological discovery and open new avenues for ultrasensitive disease diagnostics.

}, doi = {10.1038/s41592-021-01143-1}, url = {https://doi.org/10.1038/s41592-021-01143-1}, author = {Javier Antonio Alfaro and Peggy Bohl{\"a}nder and Mingjie Dai and Mike Filius and Cecil J. Howard and Xander F. van Kooten and Shilo Ohayon and Adam Pomorski and Sonja Schmid and Aleksei Aksimentiev and Eric V. Anslyn and Georges Bedran and Chan Cao and Mauro Chinappi and Etienne Coyaud and Cees Dekker and Gunnar Dittmar and Nicholas Drachman and Rienk Eelkema and David Goodlett and S{\'e}bastien Hentz and Umesh Kalathiya and Neil L. Kelleher and Ryan T. Kelly and Zvi Kelman and Sung Hyun Kim and Bernhard Kuster and David Rodriguez-Larrea and Stuart Lindsay and Giovanni Maglia and Edward M. Marcotte and John P. Marino and Christophe Masselon and Michael Mayer and Patroklos Samaras and Kumar Sarthak and Lusia Sepiashvili and Derek Stein and Meni Wanunu and Mathias Wilhelm and Peng Yin and Amit Meller and Chirlmin Joo} } @article {354, title = {Hydrophobic Interactions between DNA Duplexes and Synthetic and Biological Membranes.}, journal = {Journal of the American Chemical Society}, volume = {143}, year = {2021}, month = {05/2021}, pages = {8305-8313}, chapter = {8305}, abstract = {

Equipping DNA with hydrophobic anchors enables targeted interaction with lipid bilayers for applications in biophysics, cell biology, and synthetic biology. Understanding DNA-membrane interactions is crucial for rationally designing functional DNA. Here we study the interactions of hydrophobically tagged DNA with synthetic and cell membranes using a combination of experiments and atomistic molecular dynamics (MD) simulations. The DNA duplexes are rendered hydrophobic by conjugation to a terminal cholesterol anchor or by chemical synthesis of a charge-neutralized alkyl-phosphorothioate (PPT) belt. Cholesterol-DNA tethers to lipid vesicles of different lipid compositions and charges, while PPT DNA binding strongly depends on alkyl length, belt position, and headgroup charge. Divalent cations in the buffer can also influence binding. Our MD simulations directly reveal the complex structure and energetics of PPT DNA within a lipid membrane, demonstrating that longer alkyl-PPT chains provide the most stable membrane anchoring but may disrupt DNA base paring in solution. When tested on cells, cholesterol-DNA is homogeneously distributed on the cell surface, while alkyl-PPT DNA accumulates in clustered structures on the plasma membrane. DNA tethered to the outside of the cell membrane is distinguished from DNA spanning the membrane by nuclease and sphingomyelinase digestion assays. The gained fundamental insight on DNA-bilayer interactions will guide the rational design of membrane-targeting nanostructures.

}, issn = {1520-5126}, doi = {10.1021/jacs.0c13235}, author = {Jones, Sioned F and Joshi, Himanshu and Terry, Stephen J and Burns, Jonathan R and Aleksei Aksimentiev and Eggert, Ulrike S and Howorka, Stefan} } @article {317, title = {Electrical recognition of the twenty proteinogenic amino acids using an aerolysin nanopore}, journal = {Nature Biotechnology}, volume = {38}, year = {2020}, month = {02/2020}, pages = {176-181}, chapter = {176}, abstract = {

Efforts to sequence single protein molecules in nanopores have been hampered by the lack of techniques with sufficient sensitivity to discern the subtle molecular differences among all twenty amino acids. Here we report ionic current detection of all twenty proteinogenic amino acids in an aerolysin nanopore with the help of a short polycationic carrier. Application of molecular dynamics simulations revealed that the aerolysin nanopore has a built-in single-molecule trap that fully confines a polycationic carrier-bound amino acid inside the sensing region of the aerolysin. This structural feature means that each amino acid spends sufficient time in the pore for sensitive measurement of the excluded volume of the amino acid. We show that distinct current blockades in wild-type aerolysin can be used to identify 13 of the 20 natural amino acids. Furthermore, we show that chemical modifications, instrumentation advances and nanopore engineering offer a route toward identification of the remaining seven amino acids. These findings may pave the way to nanopore protein sequencing.

Research Highlights

1.\ Tang, Lei. "Sensing proteinogenic amino acids." Nature Methods 17(2):126 (2020) DOI:\ 10.1038/s41592-020-0741-z

2.\ Howorka, Stefan, and Zuzanna S. Siwy. "Reading amino acids in a nanopore." Nature Biotechnology 38(2):159 (2020) DOI:\ 10.1038/s41587-019-0401-y

3.\ Nanopores can identify the amino acids in proteins, the first step to sequencing, Highlight by Illinois news bureau.\ \ 

}, isbn = {1546-1696}, doi = {10.1038/s41587-019-0345-2}, url = {https://doi.org/10.1038/s41587-019-0345-2}, author = {Ouldali, Hadjer and Sarthak, Kumar and Ensslen, Tobias and Piguet, Fabien and Manivet, Philippe and Pelta, Juan and Behrends, Jan C. and Aleksei Aksimentiev and Oukhaled, Abdelghani} } @article {202, title = {Highly permeable artificial water channels that self-assemble into two-dimensional arrays}, journal = {Proceedings of the National Academy of Science}, volume = {112}, year = {2015}, month = {07/2015}, pages = {9810-9815}, chapter = {9810}, abstract = {

Bioinspired artificial water channels aim to combine the high permeability and selectivity of biological aquaporin (AQP) water channels with chemical stability. We characterized a new architecture of artificial water channels, peptide-appended pillar[5]arenes (PAPs). The average single-channel osmotic water permeability for PAPs is 1.0({\textpm} 0.3){\texttimes}10-14\ cm3/s or 3.5({\textpm} 1.0){\texttimes}108\ water molecules/s, which is in the range of AQPs (3.4~40.3{\texttimes}108\ water molecules/s) and their current synthetic analogs, carbon nanotubes (CNTs, 9.0{\texttimes}108\ water molecules/s). This permeability is an order of magnitude higher than first-generation artificial water channels (20 to ~107\ water molecules/s). Furthermore, within lipid bilayers, PAP channels can self-assemble into two-dimensional arrays. Importantly for permeable membrane design, the pore density of PAP channel arrays (~2.6{\texttimes}105\ pores/μm2) is two orders of magnitude higher than CNT membranes (0.1~2.5{\texttimes}103\ pores/μm2). PAP channels thus combine the advantages of biological channels and CNTs and improve upon them through their relatively simple synthesis, chemical stability and propensity to form arrays.

}, keywords = {membrane, nanochannel, permeation}, doi = {10.1073/pnas.1508575112}, author = {Yue-xiao Shen and Wen Si and Mustafa Erbakan and Karl Decker and Rita De Zorzi and Patrick O. Saboe and You Jung Kang and Sheereen Majd and Peter J. Butler and Thomas Walz and Aleksei Aksimentiev and Jun-li Hou and Manish Kumar} } @article {219, title = {The acetylation landscape of the H4 histone tail: disentangling the interplay between the specific and cumulative effects}, journal = {J Am Chem Soc}, volume = {137}, year = {2015}, pages = {6245{\textendash}6253}, doi = {10.1021/jacs.5b00235}, author = {Winogradoff, David and Echeverria, Ignacia and Potoyan, Davit A and Papoian, Garegin A} } @inbook {145, title = {Modeling the Interface between Biological and Synthetic Components in Hybrid Nanosystems}, booktitle = {Simulations in Nanobiotechnology}, year = {2011}, pages = {43-60}, publisher = {CRC Press}, organization = {CRC Press}, chapter = {2}, abstract = {Hybrid structures that combine biological and inorganic materials are ubiquitous in the biosphere, from the carbonated hydroxyapatite that makes up the inorganic structure of bones to the calcium carbonate created by coral polyps and coralline algae that form the structure of coral reefs. The ability to design materials that are bio-compatible, or able to be incorporated into organisms without provoking an immune response, is important for medicine and therapeutics, for example, in prosthetics and implanted medical devices such as pacemakers. However, designing synthetic materials to interact favorably with biological components is made difficult by the fact that many biological processes, including immune response, are dictated by interactions betweeen biomolecules and their environment on the nanometer scale. Therefore, our ability to fabricate materials with nanometer precision would provide hope for a future in which man-made devices can easily interface with the biological world.}, issn = {9781439835043}, url = {http://www.crcpress.com/product/isbn/9781439835043}, author = {Carr, Rogan and Jeffrey Comer and Aleksei Aksimentiev}, editor = {Eom, Kilho} }